Blog | Advanced Design Technology

Consultancy Summary: Design and Optimization of a Centrifugal Pump Stage

What are the design targets? The project involves the design and optimization of a high specific speed centrifugalpump stage. The optimized stage design should deliver...

Read the article

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

In the first part of this article, we showed how to perform the initial design of a radial inflow turbine rotor using the 3D inverse design method.

In this second part,...

Read the article

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial inflow turbines are used in a wide range of applications, from big geothermal power plants to small gas turbines and turbochargers for automotive engines. They...

Read the article

Book a LIVE demo on the design of a turbomachinery application of your choice.

Our demo is tailored to your specific application and design challenges

Subscribe to our newsletter

Recent Articles

Chiller Compressor: Refrigeration Cycle Analysis and Meanline Design

The awareness in energy saving has continuously increased in the past decades, and this has led to higher energy efficiency requirement on HVAC...

Chiller Compressor: Stage Design and Performance Analysis

In another article, we cover the refrigeration cycle analysis and meanline design of a single stage centrifugal compressor for chiller application.

...

Automatic Optimization of a Tandem Blade Centrifugal Compressor

In another article, based on one of ADT’s technical papers that was presented at the European Turbomachinery Conference [1], we cover the baseline...

Baseline Design of a Tandem Blade Centrifugal Compressor

In the past, tandem blades have shown promise in improving the performance of centrifugal compressors. However, the conventional methods for...

Multi-Point Optimization of an Industrial Centrifugal Compressor with Return Channel

In another article, based on one of ADT’s technical papers that was presented at the Turbomachinery Society of Japan [1], we cover the baseline...

Design of an Industrial Centrifugal Compressor with Return Channel

Centrifugal compressors are one of the most commonly used gas compression systems across a variety of industries. For a centrifugal compressor, the...

Design of an Axial Compressor Stage

Across the specific speed range, compressors are subject to various flow phenomena and loss mechanisms which are dominant in that particular range....

Automatic Optimization of an Axial Compressor Stage

In another article on the manual design of an axial compressor stage, we showed that there is scope for improvement in the baseline stage, especially...

Corner Separation Control in Vaned Diffusers of Compressors

Across the specific speed range, compressors are subject to various flow phenomena and loss mechanisms which are dominant in that particular range....

Book a LIVE demo on the design of a turbomachinery application of your choice..

Our demo is tailored to your specific application and design challenges

Welcome to the Advanced Design Technology Blog

Consultancy Summary: Design and Optimization of a Centrifugal Pump Stage

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Book a LIVE demo on the design of a turbomachinery application of your choice.

Subscribe to our newsletter

Recent Articles

Book a LIVE demo on the design of a turbomachinery application of your choice..

Subscribe to our newsletter