Blog | Advanced Design Technology (8)

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

In the first part of this article, we showed how to perform the initial design of a radial inflow turbine rotor using the 3D inverse design method.

In this second part,...

Read the article

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial inflow turbines are used in a wide range of applications, from big geothermal power plants to small gas turbines and turbochargers for automotive engines. They...

Read the article

Axial Turbine Stacking - Best Practices for Secondary Flow Suppression

Axial turbines are used in a wide range of applications, from aero-engines to electricity generation in thermal power plants. They are employed in both gas and steam...

Read the article

Book a LIVE demo on the design of a turbomachinery application of your choice.

Our demo is tailored to your specific application and design challenges

Subscribe to our newsletter

Recent Articles

How to Optimize the Design of a Reversible Pump-Turbine Runner with High Efficiency and Stability?

Pumped hydro energy storage (PHES) is currently the only proven large-scale (>100 MW) energy storage technology. The benefits of PHES on electrical...

TURBOdesign Suite 2022R1: A Gateway to Automation in Turbomachinery Design

TURBOdesign Suite 2022R1 is a gateway to automation in Turbomachinery design with the following major enhancements.

New Features in TURBOdesign Suite 2021R1 and 2021R2

During 2021, there have been two releases of TURBOdesign Suite (2021R1 and 2021R2). One major focus of these releases were to build on new GUI...

Guide to Design a Multi-Stage Pump Inducer

The customer, one of the world’s largest pump manufacturers, asked ADT to design an inducer to fit in one of their products, a multi-stage...

Loss Generation Sources in Subsonic and Transonic Centrifugal Compressors by Entropy Production Rate

One of the most important issues in design of centrifugal compressors is to understand what is the main source loss in the impeller and how changes...

How to Optimize a 6.2:1 Pressure Ratio Centrifugal Compressor Impeller?

Transonic centrifugal compressors with pressure ratios higher than 5:1 are commonly used in marine diesel turbocharger applications as well as in...

How Hyosung Goodsprings, Pump Leader in Korea, Designed their Mixed Flow Pump Stages?

Hyosung Goodsprings is one of leading pump makers in Korea. We have secured the leading pump maker’s position with the continuous effort over the...

How to Design and Optimize Cryogenic Rocket Engines by Coupling Flownex, TURBOdesign and Ansys Workbench?

As we look at new off-world destinations and applications, our launch-vehicle designs constantly need to evolve. Each component will need to be...

How to Design a Centrifugal Compressor Stage and a Radial-Inflow Turbine Stage for a Supercritical CO2 Recompression with the Brayton Cycle?

The supercritical cycle which always operates above the critical pressure and the critical temperature of its working fluid was devised to overcome...

Book a LIVE demo on the design of a turbomachinery application of your choice..

Our demo is tailored to your specific application and design challenges

Welcome to the Advanced Design Technology Blog

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Axial Turbine Stacking - Best Practices for Secondary Flow Suppression

Book a LIVE demo on the design of a turbomachinery application of your choice.

Subscribe to our newsletter

Recent Articles

Book a LIVE demo on the design of a turbomachinery application of your choice..

Subscribe to our newsletter