Blog | Advanced Design Technology | Pumps & Hydraulic Turbines

Consultancy Summary: Design and Optimization of a Centrifugal Pump Stage

What are the design targets? The project involves the design and optimization of a high specific speed centrifugalpump stage. The optimized stage design should deliver...

Read the article

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

In the first part of this article, we showed how to perform the initial design of a radial inflow turbine rotor using the 3D inverse design method.

In this second part,...

Read the article

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial inflow turbines are used in a wide range of applications, from big geothermal power plants to small gas turbines and turbochargers for automotive engines. They...

Read the article

Book a LIVE demo on the design of a turbomachinery application of your choice.

Our demo is tailored to your specific application and design challenges

Subscribe to our newsletter

Recent Articles

Consultancy Summary: Design and Optimization of a Centrifugal Pump Stage

What are the design targets? The project involves the design and optimization of a high specific speed centrifugalpump stage. The optimized stage...

What is the Optimum Blade Loading for Pumps?

Pumps account for 20% of global energy consumption, and energy is often the largest cost in the life cycle costs of a pump system. Critical to a good...

How to perform a Multi-Objective Optimization of a Centrifugal Pump Stage?

In this consultancy summary , ADT was asked to perform a multi-objective design optimization of a pump stage.The target was to improve the impeller...

Optimum Blade Loading for Reduction of Secondary Flow in Pump Impellers

Across the specific speed range, pumps are subject to various flow phenomena and loss mechanisms which are dominant in that particular range. For...

Optimum Blade Loading for Control of Cavitation in Pumps

Across the specific speed range, pumps are subject to various flow phenomena and loss mechanisms which are dominant in that particular range. For...

How to Perform a Multi-Objective Automatic Optimization Strategy for Design of Waterjet Pumps?

Waterjets are increasingly being used as the propulsive method of choice for high speed marine vehicles. A pump designed for waterjet application...

Suppression of Secondary Flows in a Mixed-Flow Pump Impeller by Application of Three-Dimensional Inverse Design Method : Part 2

The previous paper describes the design of the blade geometry of a medium specific speed mixed flow pump impeller by using a three-dimensional...

Suppression of Secondary Flows in a Mixed-Flow Pump Impeller by Application of Three-Dimensional Inverse Design Method : Part 1

The paper describes the design of the blade geometry of a medium specific speed mixed flow pump impellerby using a three-dimensional inverse design...

How JAXA, the Japan Aerospace Exploration Agency, Designed their Rocket Engine Turbopump?

At the present time, Stepanoff’s design methodology based on empiricism using an experimental database is still widely used in pump design.

Book a LIVE demo on the design of a turbomachinery application of your choice..

Our demo is tailored to your specific application and design challenges

Welcome to the Advanced Design Technology Blog

Consultancy Summary: Design and Optimization of a Centrifugal Pump Stage

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Book a LIVE demo on the design of a turbomachinery application of your choice.

Subscribe to our newsletter

Recent Articles

Book a LIVE demo on the design of a turbomachinery application of your choice..

Subscribe to our newsletter