Blog | Advanced Design Technology | Pumps & Hydraulic Turbines (2)

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

In the first part of this article, we showed how to perform the initial design of a radial inflow turbine rotor using the 3D inverse design method.

In this second part,...

Read the article

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial inflow turbines are used in a wide range of applications, from big geothermal power plants to small gas turbines and turbochargers for automotive engines. They...

Read the article

Axial Turbine Stacking - Best Practices for Secondary Flow Suppression

Axial turbines are used in a wide range of applications, from aero-engines to electricity generation in thermal power plants. They are employed in both gas and steam...

Read the article

Book a LIVE demo on the design of a turbomachinery application of your choice.

Our demo is tailored to your specific application and design challenges

Subscribe to our newsletter

Recent Articles

How to Optimize the Design of a Reversible Pump-Turbine Runner with High Efficiency and Stability?

Pumped hydro energy storage (PHES) is currently the only proven large-scale (>100 MW) energy storage technology. The benefits of PHES on electrical...

Guide to Design a Multi-Stage Pump Inducer

The customer, one of the world’s largest pump manufacturers, asked ADT to design an inducer to fit in one of their products, a multi-stage...

How Hyosung Goodsprings, Pump Leader in Korea, Designed their Mixed Flow Pump Stages?

Hyosung Goodsprings is one of leading pump makers in Korea. We have secured the leading pump maker’s position with the continuous effort over the...

How to Design and Optimize Cryogenic Rocket Engines by Coupling Flownex, TURBOdesign and Ansys Workbench?

As we look at new off-world destinations and applications, our launch-vehicle designs constantly need to evolve. Each component will need to be...

How to Optimize the Efficiency and Cavitation of High Speed Centrifugal Pumps?

Franklin Electric is a global leader in the manufacturing and distribution of products and systems focused on the movement and management of water...

Using TURBOdesign Suite to Optimize the Efficiency and Cavitation of Franklin Electric’s High Speed Pumps

Franklin Electric is a global leader in the manufacturing and distribution of products and systems focused on the movement and management of water...

ADT will be part of the IMECE® 2021 Conference

Prof. Mehrdad Zangeneh will be part of the Track Plenary Speakers at the IMECE® on November, 2nd at 12:35pm. ASME's International Mechanical...

Design Optimization of Cryogenic Pump Inducer

In conventional design practice, helical inducers are commonly used for industrial inducer pump applications. Several approaches were tested to...

Parametric Design of a Waterjet Pump by Means of Inverse Design, CFD Calculations and Experimental Analyses

The present paper describes the parametric design of a mixed-flow water-jet pump. The pump impeller and diffuser geometries were parameterized by...

Book a LIVE demo on the design of a turbomachinery application of your choice..

Our demo is tailored to your specific application and design challenges

Welcome to the Advanced Design Technology Blog

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Axial Turbine Stacking - Best Practices for Secondary Flow Suppression

Book a LIVE demo on the design of a turbomachinery application of your choice.

Subscribe to our newsletter

Recent Articles

Book a LIVE demo on the design of a turbomachinery application of your choice..

Subscribe to our newsletter