Blog | Advanced Design Technology

Consultancy Summary: Design and Optimization of a Centrifugal Pump Stage

What are the design targets? The project involves the design and optimization of a high specific speed centrifugalpump stage. The optimized stage design should deliver...

Read the article

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

In the first part of this article, we showed how to perform the initial design of a radial inflow turbine rotor using the 3D inverse design method.

In this second part,...

Read the article

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial inflow turbines are used in a wide range of applications, from big geothermal power plants to small gas turbines and turbochargers for automotive engines. They...

Read the article

Book a LIVE demo on the design of a turbomachinery application of your choice.

Our demo is tailored to your specific application and design challenges

Subscribe to our newsletter

Recent Articles

Automatic Optimization of a Wastewater Pump

In the first part of this article on the design of a wastewater pump, we showed that there is scope for improvement in the baseline impeller...

Design of a Wastewater Pump

A waste water pump or sewage pump is used to transfer sewage liquids and solids from homes and businesses through sewer pipes to the wastewater...

Optimization of a Heat Pump Compressor for Small-Scale Domestic Application

In the first part of this article on the design of a small-scale high speed centrifugal compressor for domestic heat pumps, we showed that the...

Design of a Heat Pump Compressor for Small-Scale Domestic Application

Heat pumps are used to absorb heat from a cold space and transfer it to a warmer one, such as for ambient heating in case of air conditioners. For...

Optimization of a Mixed Flow Pump

In the first part of this article on the design and analysis of a high specific speed mixed flow pump, we showed that there is a complex trade-off...

Design of a Mixed Flow Pump

Mixed-flow pumps are widely used at drainage pumping stations, power plants and in water-jet applications. When the specific speed is high, the...

Performance Analysis of Turbopumps

The first part of this article showed how to make use of the different options in TURBOdesign1 to rapidly generate three different turbopump...

Design of Turbopumps

Turbopumps are mainly used in rocket engines and in low suction pressure situations in the industry. As Figure 1 shows, their suction specific speed...

Automatic Optimization of a Centrifugal Pump Stage

In another article on the manual design of a centrifugal pump stage, we showed that there is scope for improvement in the baseline impeller...

Book a LIVE demo on the design of a turbomachinery application of your choice..

Our demo is tailored to your specific application and design challenges

Welcome to the Advanced Design Technology Blog

Consultancy Summary: Design and Optimization of a Centrifugal Pump Stage

Radial Turbine Optimization: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Radial Turbine Design: A 3D Inverse Design Based Rapid Multi-disciplinary Optimization Strategy

Book a LIVE demo on the design of a turbomachinery application of your choice.

Subscribe to our newsletter

Recent Articles

Book a LIVE demo on the design of a turbomachinery application of your choice..

Subscribe to our newsletter