Blog | Advanced Design Technology (7)

Blade Loading, Inverse Design and Shape Parameterization

TL;DR: Blade Loading, Inverse Design and Shape Parameterization

Blade Loading Defined: Fundamentally - the pressure difference between the pressure and suction sides...

Read the article

Machine Learning for Wastewater Pump Design

TL;DR: Machine Learning for Wastewater Pump Design

This blog describes how tools from Advanced Design Technology (ADT) use a combination of 3D Inverse Design and...

Read the article

Maximizing Refrigeration Performance with ML & 3D Inverse Design

TL;DR: Maximizing Refrigeration Performance with ML & 3D Inverse Design

Explore how 3D Inverse Design and Machine Learning are replacing conventional workflows to...

Read the article

Book a LIVE demo on the design of a turbomachinery application of your choice.

Our demo is tailored to your specific application and design challenges

Subscribe to our newsletter

Recent Articles

How to perform a Multi-Objective Optimization of a Centrifugal Pump Stage?

In this consultancy summary, ADT was asked to perform a multi-objective design optimization of a pump stage.The target was to improve the impeller...

Shock Control in Transonic Centrifugal Compressors

Across the specific speed range, compressors are subject to various flow phenomena and loss mechanisms which are dominant in that particular range....

Shock Control in a Helicopter Engine APU Compressor

Across the specific speed range, compressors are subject to various flow phenomena and loss mechanisms which are dominant in that particular range....

Optimum Blade Loading Secondary Flow Reduction in Subsonic Impellers

Across the specific speed range, compressors are subject to various flow phenomena and loss mechanisms which are dominant in that particular range....

Optimum Blade Loading for Secondary Flow Reduction in Impellers with Splitters

Across the specific speed range, compressors are subject to various flow phenomena and loss mechanisms which are dominant in that particular range....